Mars software issues

Making spaceflight history will have to wait another week. Basically, Ingenuity needs a re-boot. This software update will modify the process by which the two flight controllers boot up, allowing the hardware and software to safely transition to the flight state. Engineers will then load the software onto the flight controllers and then boot Ingenuity on the new flight software.

Meanwhile, Ingenuity continues to be healthy on the surface of Mars. Fixed the problem that the screen cannot be configured successfully when smart settings on the chip is done after the smart settings on the common chip is done.

Fixed the problem that the current gain settings in the advanced mode in extended attributes of the S chip does not take effect. Fixed the problem that the screen cannot be configured successfully by smart settings on the chip.

Fixed the problem that the software crashes after the GCLK duty cycle is set to be greater than or equal to and then the parameters are sent to the receiving cards. Fixed the problem that the seam correction function supports only the screen division loaded by the first DVI offset , but not the all the divisions loaded by multiple DVIs. Fixed the problem that only one screen in the combined screen applies the color space settings that the color space is set to PAL or another one on the brightness adjustment page.

Added the function of exporting automatic brightness adjustment log. Supports the H9 device. Optimized the efficiency of saving the specified parameters of receiving card to hardware by using the mechanism of saving only the updated parameters.

Remove the limit that the screen width must be less than or equal to pixels during screen configuration when the low latency function is enabled. Notes 1. The effects of manual and automatic brightness adjustments are inconsistent because the chip uses the Gamma from the chip manufacturer.

If an entire row or column of cabinets is set to be blank not used to display image when the MCTRL device is used, the sizes of those cabinets must be the same. The brighter pixel correction function does not support offset, blanking or cascaded devices. Hardware version readback is not supported in redundancy status. For greater scan, please use the irregular cabinet construction function.

The chip supports common anode only. The later version LCT is compatible with the configuration file from the earlier version, not vice versa.

Category: Software Brand: Novastar. NovaLCT 5. Support for backing up display system files to the cloud 2. Support to obtain configuration files and firmware programs from the cloud 3.

Direct Control of Period When the new, updated Direct Control of the Period option, all cleared transactions will have a period assigned to them. Multiple Users Option A multiple user option has been added that will allow multiple users to create their own settings under Miscellaneous Options. Date Entry To simplify reconcile and date entry, PcMars will now only allow entries to be entered within the set of books beginning and ending date.

Employee List An employee for a new paycheck must be in the employee list. Payroll Minnesota Labor Reporting Requirement Added an option that will allow users to print an information statement to conform to the new Minnesota Labor Reporting Requirements on paystubs. Close Set of Books Option An option to close set of books when exiting the program has been added. Browse Screen When using the Browse Screen, there is now a right-click option to view that transaction as a report.

Need Software Support? Software Support. Additional Enhancements. FREE Download. Get Support. How-To Videos. Patriot missile defence system in Saudi Arabia, failed to detect an attack on an Army barracks.

A government report found that a software problem led to an inaccurate tracking calculation that became worse the longer the system operated. On the day of the incident, the system had been operating for more than hours, and the inaccuracy was serious enough to cause the system to look in the wrong place for the incoming missile. The attack killed 28 American soldiers. Prior to the incident, Army officials had fixed the software to improve the Patriot systems accuracy.

That modified software reached the base the day after the attack. Angry customers demanded a replacement for anyone who asked, and Intel agreed. Although not a software error, on September 6, , this satellite was badly damaged while being worked on at the Lockheed Martin Space Systems factory. The satellite fell to the floor as a team was turning it to a horizontal position.

An inquiry into the mishap determined that it was caused by a lack of procedural discipline throughout the facility. Turns out that while the turn-over cart used during the procedure was in storage, a technician removed twenty-four bolts securing an adapter plate to it without documenting the action.